Color:
Includes: Bi metal blade, Vertical cutting table
Does Not Include: Additional blades, Mist system, Replacement cutting fluid
Built for Shops That Need Portable Horizontal and Vertical Metal Cutting
The SE-810 dual mitering bandsaw is a semi automatic horizontal bandsaw designed for cutting steel bar, tubing, and structural material. The machine uses a high torque DC motor with electronic speed control to adjust blade speed based on material type and cutting requirements.
The saw uses a direct drive gear reduction system which eliminates belts and pulleys. Electronic variable speed controls and a digital tachometer allow the operator to monitor blade speed during cutting operations.
In real shop use the SE-810 is used in fabrication shops, maintenance departments, and job sites where portability and the ability to convert between horizontal and vertical cutting are required.
Motor Power: 1.25 HP
Blade Width: 1 inch
Blade Length: 9 ft 10 inch
Blade Speed Range: 65 to 250 ft per minute
Maximum Round Capacity: 10 inch
Voltage: 110V
USED FOR
• Fabrication shops cutting steel bar and tubing
• Maintenance departments and repair shops
• Portable cutting on job sites
• Shops needing both horizontal and vertical cutting
Not For
• Production cutting environments requiring large capacity saws
• Materials larger than listed cutting capacity
• Shops requiring fully automatic feed systems
If you do not have access to a 110V power outlet, this is not your machine.
Material Thickness | Performance
Solid Round 90 degrees | 10 inch
Solid Round 45 degrees | 6 inch
Solid Square 90 degrees | 8 inch x 10 inch
Solid Square 45 degrees | 8 inch x 6 inch
Maximum Output: Determined by blade selection and material type
Duty Cycle:
Designed for intermittent cutting with proper blade selection and cooling.
Technical Specifications for the Dual Mitering Bandsaw Model SE-810
Model Number: SE-810
Part Number: 983113
Motor Power: 1.25 HP
Voltage: 110V
Blade Width: 1 inch
Blade Length: 9 ft 10 inch
Blade Speed Range: 65 to 250 ft per minute
Solid Round Capacity 90 Degrees: 10 inch
Solid Round Capacity 45 Degrees: 6 inch
Solid Square Capacity 90 Degrees: 8 inch x 10 inch
Solid Square Capacity 45 Degrees: 8 inch x 6 inch
Power Requirements
110V single phase electrical service required
Dual Mitering Bandsaw Model SE-810 Package Includes
Bi metal blade
Vertical cutting table
Upgrade options available via dropdown selections.
Laguna Tools - Dual Mitering Bandsaws Model SE-810 SKU: 983113_User Manual
Laguna Tools - Dual Mitering Bandsaws Model SE-810 SKU: 983113_Parts Lists
Warning
This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
Includes: Bi metal blade, Vertical cutting table
Does Not Include: Additional blades, Mist system, Replacement cutting fluid
Built for Shops That Need Portable Horizontal and Vertical Metal Cutting
The SE-810 dual mitering bandsaw is a semi automatic horizontal bandsaw designed for cutting steel bar, tubing, and structural material. The machine uses a high torque DC motor with electronic speed control to adjust blade speed based on material type and cutting requirements.
The saw uses a direct drive gear reduction system which eliminates belts and pulleys. Electronic variable speed controls and a digital tachometer allow the operator to monitor blade speed during cutting operations.
In real shop use the SE-810 is used in fabrication shops, maintenance departments, and job sites where portability and the ability to convert between horizontal and vertical cutting are required.
Motor Power: 1.25 HP
Blade Width: 1 inch
Blade Length: 9 ft 10 inch
Blade Speed Range: 65 to 250 ft per minute
Maximum Round Capacity: 10 inch
Voltage: 110V
USED FOR
• Fabrication shops cutting steel bar and tubing
• Maintenance departments and repair shops
• Portable cutting on job sites
• Shops needing both horizontal and vertical cutting
Not For
• Production cutting environments requiring large capacity saws
• Materials larger than listed cutting capacity
• Shops requiring fully automatic feed systems
If you do not have access to a 110V power outlet, this is not your machine.
Material Thickness | Performance
Solid Round 90 degrees | 10 inch
Solid Round 45 degrees | 6 inch
Solid Square 90 degrees | 8 inch x 10 inch
Solid Square 45 degrees | 8 inch x 6 inch
Maximum Output: Determined by blade selection and material type
Duty Cycle:
Designed for intermittent cutting with proper blade selection and cooling.
Technical Specifications for the Dual Mitering Bandsaw Model SE-810
Model Number: SE-810
Part Number: 983113
Motor Power: 1.25 HP
Voltage: 110V
Blade Width: 1 inch
Blade Length: 9 ft 10 inch
Blade Speed Range: 65 to 250 ft per minute
Solid Round Capacity 90 Degrees: 10 inch
Solid Round Capacity 45 Degrees: 6 inch
Solid Square Capacity 90 Degrees: 8 inch x 10 inch
Solid Square Capacity 45 Degrees: 8 inch x 6 inch
Power Requirements
110V single phase electrical service required
Dual Mitering Bandsaw Model SE-810 Package Includes
Bi metal blade
Vertical cutting table
Upgrade options available via dropdown selections.
Laguna Tools - Dual Mitering Bandsaws Model SE-810 SKU: 983113_User Manual
Laguna Tools - Dual Mitering Bandsaws Model SE-810 SKU: 983113_Parts Lists
Warning
This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
