Color:
Includes: Wood lathe, Tool rest, Face plate
Does Not Include: Optional bed extension, Vacuum chuck, Additional turning tools
Built for woodturners who need variable speed control and mid size turning capacity using standard 110V power.
The Laguna Revo 18 x 36 is a variable speed wood lathe designed for bowl turning, spindle work, and general woodworking applications. It uses a 1.5 HP induction motor paired with a Delta S1 variable frequency drive that converts single phase input into three phase output for smooth speed control across both low and high RPM ranges.
The steel bed provides rigidity while allowing the headstock to travel along the full length of the bed. The electronic variable speed system allows operators to make precise RPM adjustments while monitoring spindle speed on the digital readout.
In real shop use this lathe is commonly used for bowls, furniture components, and spindle turning projects where stable speed control and consistent torque are required.
Motor: 1.5 HP induction motor
Motor Speed: 1725 RPM
Input Power: 110V single phase
Output Power: 3 phase via VFD
Variable Frequency Drive: Delta S1
RPM Range Low: 50 to 1300 RPM
RPM Range High: 135 to 3500 RPM
Swing Over Bed: 18 inches
Distance Between Centers: 36 inches USED FOR
Not For
Turning Type | Capacity
Bowl Turning | Up to 18 inch diameter
Spindle Turning | Up to 36 inches between centers
Maximum Output: 1.5 HP motor
Duty Cycle:
Designed for continuous woodturning operation
The Revo 18 x 36 110V lathe is designed for woodworkers who want variable speed control without requiring 220V shop power. It provides mid size turning capacity and electronic RPM adjustment suitable for most woodworking projects.
Is This Machine Right For You
You May Need A Different Machine If
Technical Specifications for the Laguna Tools Wood Lathe Revo 18 x 36 Lathe 110V
Motor: 1.5 HP induction motor, 1725 RPM
Voltage: 110V
Frequency: 60 Hz
Phase: 1 phase input, 3 phase output
Variable Frequency Drive: Delta S1
Recommended Breaker: 15 Amp
RPM Low Range: 50 to 1300 RPM
RPM High Range: 135 to 3500 RPM
Swing Over Bed: 18 inches
Swing Over Banjo: 13.5 inches
Maximum Outboard Swing: 32 inches with optional extension
Distance Between Centers: 36 inches
Headstock Travel: Full length of bed
Headstock Through Bore: 0.375 inches
Tailstock Through Bore: 0.375 inches
Spindle Size: 1.25 inch x 8 TPI right hand thread
Spindle Taper: MT2
Tailstock Taper: MT2
Tool Rest Post Size: 1 inch
Bed Material: ASTM A36 steel
Bed Gap: 50 mm
Front Bearing: TPI Taiwan 6207LLU
Rear Bearing: TPI Taiwan 6205LLU
Spindle Index Positions: 14 / 36 / 48
Floor to Spindle Center: 41.5 inches
Floor to Bed: 32.5 inches with pads
Dimensions: 60 x 26 x 47 inches
Shipping Weight: 570 lbs
Power Requirements
110V single phase input
15 amp breaker recommended
NEMA 5-15P plug
6 foot power cord
Laguna Tools Wood Lathe Revo 18 x 36 Lathe Package Includes
Upgrade options available via dropdown selections.
Warranty
Refer to manufacturer documentation for warranty coverage details.
Revo Lathe Model Comparison
Download the Laguna Tools Wood Lathe Revo 18|36 User Manual
Laguna Tools - Lathes Revo 18|36 Lathe 110V SKU: MLAREVO 1836-110-150_User Manual
Laguna Tools - Lathes Revo 18|36 Lathe 110V SKU: MLAREVO 1836-110-150_Parts Manual
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
Includes: Wood lathe, Tool rest, Face plate
Does Not Include: Optional bed extension, Vacuum chuck, Additional turning tools
Built for woodturners who need variable speed control and mid size turning capacity using standard 110V power.
The Laguna Revo 18 x 36 is a variable speed wood lathe designed for bowl turning, spindle work, and general woodworking applications. It uses a 1.5 HP induction motor paired with a Delta S1 variable frequency drive that converts single phase input into three phase output for smooth speed control across both low and high RPM ranges.
The steel bed provides rigidity while allowing the headstock to travel along the full length of the bed. The electronic variable speed system allows operators to make precise RPM adjustments while monitoring spindle speed on the digital readout.
In real shop use this lathe is commonly used for bowls, furniture components, and spindle turning projects where stable speed control and consistent torque are required.
Motor: 1.5 HP induction motor
Motor Speed: 1725 RPM
Input Power: 110V single phase
Output Power: 3 phase via VFD
Variable Frequency Drive: Delta S1
RPM Range Low: 50 to 1300 RPM
RPM Range High: 135 to 3500 RPM
Swing Over Bed: 18 inches
Distance Between Centers: 36 inches USED FOR
Not For
Turning Type | Capacity
Bowl Turning | Up to 18 inch diameter
Spindle Turning | Up to 36 inches between centers
Maximum Output: 1.5 HP motor
Duty Cycle:
Designed for continuous woodturning operation
The Revo 18 x 36 110V lathe is designed for woodworkers who want variable speed control without requiring 220V shop power. It provides mid size turning capacity and electronic RPM adjustment suitable for most woodworking projects.
Is This Machine Right For You
You May Need A Different Machine If
Technical Specifications for the Laguna Tools Wood Lathe Revo 18 x 36 Lathe 110V
Motor: 1.5 HP induction motor, 1725 RPM
Voltage: 110V
Frequency: 60 Hz
Phase: 1 phase input, 3 phase output
Variable Frequency Drive: Delta S1
Recommended Breaker: 15 Amp
RPM Low Range: 50 to 1300 RPM
RPM High Range: 135 to 3500 RPM
Swing Over Bed: 18 inches
Swing Over Banjo: 13.5 inches
Maximum Outboard Swing: 32 inches with optional extension
Distance Between Centers: 36 inches
Headstock Travel: Full length of bed
Headstock Through Bore: 0.375 inches
Tailstock Through Bore: 0.375 inches
Spindle Size: 1.25 inch x 8 TPI right hand thread
Spindle Taper: MT2
Tailstock Taper: MT2
Tool Rest Post Size: 1 inch
Bed Material: ASTM A36 steel
Bed Gap: 50 mm
Front Bearing: TPI Taiwan 6207LLU
Rear Bearing: TPI Taiwan 6205LLU
Spindle Index Positions: 14 / 36 / 48
Floor to Spindle Center: 41.5 inches
Floor to Bed: 32.5 inches with pads
Dimensions: 60 x 26 x 47 inches
Shipping Weight: 570 lbs
Power Requirements
110V single phase input
15 amp breaker recommended
NEMA 5-15P plug
6 foot power cord
Laguna Tools Wood Lathe Revo 18 x 36 Lathe Package Includes
Upgrade options available via dropdown selections.
Warranty
Refer to manufacturer documentation for warranty coverage details.
Revo Lathe Model Comparison
Download the Laguna Tools Wood Lathe Revo 18|36 User Manual
Laguna Tools - Lathes Revo 18|36 Lathe 110V SKU: MLAREVO 1836-110-150_User Manual
Laguna Tools - Lathes Revo 18|36 Lathe 110V SKU: MLAREVO 1836-110-150_Parts Manual
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
