Color:
Includes: Wide belt sanding system, Conveyor feed system, Digital control panel with programmable logic control, Automatic thickness control system
Does Not Include: Sanding belts, Dust collection system, Installation hardware
Built for Fabrication Shops Requiring High Capacity Metal Deburring and Surface Finishing
The MW37 Pro is an industrial wide belt sander designed for metal deburring, sanding, and surface texturing in production environments. It uses a single sanding head combined with a wide abrasive belt and powered conveyor to process large metal components consistently.
The machine is equipped with a 20 HP main motor, digital control panel, and automatic thickness control system. Operators can adjust feed rates and sanding height to match different materials and finishing requirements while maintaining consistent output across production runs.
In real shop use the MW37 Pro is installed in fabrication facilities processing laser cut sheet metal, flat plate components, and structural parts that require deburring or uniform surface preparation prior to coating or assembly.
Main Motor: 20 HP
Conveyor Motor: 1 HP
Sanding Belt Size: 37 inch x 75 inch
Maximum Sanding Width: 36.5 inch
Sanding Drum Diameter: 8 inch
Feed Speed: 15 to 50 FPM
Dust Ports: 3
USED FOR
• Deburring laser cut sheet metal parts
• Surface finishing flat plate components
• Preparing metal parts for powder coating or painting
• Production fabrication environments
Not For
• Small irregular shaped parts
• Materials wider than the sanding capacity
• Shops without adequate dust collection systems
Material Thickness | Performance
Thin sheet metal | Suitable
Flat plate stock | Suitable
Parts requiring uniform surface texture | Suitable
Technical Specifications for the Industrial Metal Sanders MW37 Pro
Model Number: MW37 PRO
Part Number: MSANWB37X75-1K-20-0197-1
Main Motor: 20 HP (3 Phase)
Feed Motor: 1 HP (3 Phase)
Table Lift Motor: 1/4 HP
Programmable Logic Control: Yes
Automatic Thickness Control: Yes
Maximum Sanding Height: 6 inch
Minimum Sanding Height: 26 gauge
Maximum Sanding Width: 36.5 inch
Sanding Belt Length: 75 inch
Sanding Drum Diameter: 8 inch
Sanding Drum Length: 37.9 inch
Sanding Drum Speed: 1720 RPM
Feed Speed: 15 to 50 FPM
Dust Port Size: 5 inch
Number of Dust Ports: 3
Footprint: 19 inch x 51.5 inch
Conveyor Height Lowest Setting: 31.9 inch
Operating Air Pressure: 60 PSI
Belt Oscillation: Yes
Motor Brake: Yes
Steel Cabinet: Yes
Certification: CSA
Net Weight: 1675 lbs
Shipping Weight: 2006 lbs
Power Requirements
3 Phase power required
Industrial electrical service recommended for full performance
Industrial Metal Sanders MW37 Pro Package Includes
Wide belt sanding system
Powered conveyor feed system
Digital control panel with programmable logic control
Automatic thickness control system
Upgrade options available via dropdown selections.
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
Includes: Wide belt sanding system, Conveyor feed system, Digital control panel with programmable logic control, Automatic thickness control system
Does Not Include: Sanding belts, Dust collection system, Installation hardware
Built for Fabrication Shops Requiring High Capacity Metal Deburring and Surface Finishing
The MW37 Pro is an industrial wide belt sander designed for metal deburring, sanding, and surface texturing in production environments. It uses a single sanding head combined with a wide abrasive belt and powered conveyor to process large metal components consistently.
The machine is equipped with a 20 HP main motor, digital control panel, and automatic thickness control system. Operators can adjust feed rates and sanding height to match different materials and finishing requirements while maintaining consistent output across production runs.
In real shop use the MW37 Pro is installed in fabrication facilities processing laser cut sheet metal, flat plate components, and structural parts that require deburring or uniform surface preparation prior to coating or assembly.
Main Motor: 20 HP
Conveyor Motor: 1 HP
Sanding Belt Size: 37 inch x 75 inch
Maximum Sanding Width: 36.5 inch
Sanding Drum Diameter: 8 inch
Feed Speed: 15 to 50 FPM
Dust Ports: 3
USED FOR
• Deburring laser cut sheet metal parts
• Surface finishing flat plate components
• Preparing metal parts for powder coating or painting
• Production fabrication environments
Not For
• Small irregular shaped parts
• Materials wider than the sanding capacity
• Shops without adequate dust collection systems
Material Thickness | Performance
Thin sheet metal | Suitable
Flat plate stock | Suitable
Parts requiring uniform surface texture | Suitable
Technical Specifications for the Industrial Metal Sanders MW37 Pro
Model Number: MW37 PRO
Part Number: MSANWB37X75-1K-20-0197-1
Main Motor: 20 HP (3 Phase)
Feed Motor: 1 HP (3 Phase)
Table Lift Motor: 1/4 HP
Programmable Logic Control: Yes
Automatic Thickness Control: Yes
Maximum Sanding Height: 6 inch
Minimum Sanding Height: 26 gauge
Maximum Sanding Width: 36.5 inch
Sanding Belt Length: 75 inch
Sanding Drum Diameter: 8 inch
Sanding Drum Length: 37.9 inch
Sanding Drum Speed: 1720 RPM
Feed Speed: 15 to 50 FPM
Dust Port Size: 5 inch
Number of Dust Ports: 3
Footprint: 19 inch x 51.5 inch
Conveyor Height Lowest Setting: 31.9 inch
Operating Air Pressure: 60 PSI
Belt Oscillation: Yes
Motor Brake: Yes
Steel Cabinet: Yes
Certification: CSA
Net Weight: 1675 lbs
Shipping Weight: 2006 lbs
Power Requirements
3 Phase power required
Industrial electrical service recommended for full performance
Industrial Metal Sanders MW37 Pro Package Includes
Wide belt sanding system
Powered conveyor feed system
Digital control panel with programmable logic control
Automatic thickness control system
Upgrade options available via dropdown selections.
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
