Color:
Includes: Cold saw blade, Pedestal base, Tool kit, One gallon coolant, Adjustable positive stop
Does Not Include: Blade starter pack, Loading table, Unloading table
Built for Shops Cutting Small Metal Parts with Clean Accurate Cuts
The Model 250 manual cold saw is designed for cutting metal bar, tubing, and small structural material using a circular cold saw blade. The blade operates at a low rotational speed which reduces heat and allows the cut material to remain cool after cutting.
The saw head rotates up to 45 degrees left and right for angle cutting. A mechanical coolant pump with adjustable flow helps control heat and improve blade life during operation.
In real shop use the Model 250 is used in fabrication shops, maintenance departments, and machine shops where accurate cutting of smaller metal parts is required.
Motor Power: 1.2 HP
Blade Diameter: 10 inch
Blade Speed: 44 RPM
Maximum Vise Opening: 4 inch
Maximum Miter Angle: 45 degrees left and right
Voltage: 110V
USED FOR
• Fabrication shops cutting small bar and tube
• Machine shops producing precise small cuts
• Maintenance and repair facilities
• Shops using standard 110V electrical service
Not For
• Cutting materials larger than listed capacity
• High volume production cutting environments
• Shops requiring automatic feed cutting systems
If you do not have access to a 110V power outlet, this is not your machine.
Material Thickness | Performance
Solid Round 90 degrees | 1.58 inch
Solid Round 45 degrees | 1.38 inch
Tube 90 degrees | 2.56 inch
Tube 45 degrees | 2.36 inch
Square 90 degrees | 2.17 inch
Square 45 degrees | 2 inch
Rectangle 90 degrees | 3.55 inch x 1.77 inch
Rectangle 45 degrees | 2.36 inch x 1.77 inch
Maximum Output: Determined by blade selection and material type
Duty Cycle:
Designed for manual cutting operations with coolant and proper blade selection.
Technical Specifications for the Laguna Tools Manual Cold Saw Model 250
Model Number: 250
Part Number: 974250-1E
Motor Power: 1.2 HP
Voltage: 110V
Phase: Single Phase
Blade Diameter: 10 inch
Blade Speed: 44 RPM
Maximum Vise Opening: 4 inch
Maximum Miter Angle: 45 degrees left and right
Cutting Ability: Ferrous, non ferrous metals, plastics
Solid Round Capacity 90 Degrees: 1.58 inch
Solid Round Capacity 45 Degrees: 1.38 inch
Tube Capacity 90 Degrees: 2.56 inch
Tube Capacity 45 Degrees: 2.36 inch
Square Capacity 90 Degrees: 2.17 inch
Square Capacity 45 Degrees: 2 inch
Rectangle Capacity 90 Degrees: 3.55 inch x 1.77 inch
Rectangle Capacity 45 Degrees: 2.36 inch x 1.77 inch
Work Height: 37 inch
Machine Height: 61 inch
Machine Width: 22 inch
Machine Depth: 36 inch
Machine Weight: 378 lbs
Power Requirements
110V single phase electrical service required
Laguna Tools Manual Cold Saw Model 250 Package Includes
Cold saw blade
Pedestal base
Tool kit
One gallon coolant
Adjustable positive stop
Upgrade options available via dropdown selections.
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
Includes: Cold saw blade, Pedestal base, Tool kit, One gallon coolant, Adjustable positive stop
Does Not Include: Blade starter pack, Loading table, Unloading table
Built for Shops Cutting Small Metal Parts with Clean Accurate Cuts
The Model 250 manual cold saw is designed for cutting metal bar, tubing, and small structural material using a circular cold saw blade. The blade operates at a low rotational speed which reduces heat and allows the cut material to remain cool after cutting.
The saw head rotates up to 45 degrees left and right for angle cutting. A mechanical coolant pump with adjustable flow helps control heat and improve blade life during operation.
In real shop use the Model 250 is used in fabrication shops, maintenance departments, and machine shops where accurate cutting of smaller metal parts is required.
Motor Power: 1.2 HP
Blade Diameter: 10 inch
Blade Speed: 44 RPM
Maximum Vise Opening: 4 inch
Maximum Miter Angle: 45 degrees left and right
Voltage: 110V
USED FOR
• Fabrication shops cutting small bar and tube
• Machine shops producing precise small cuts
• Maintenance and repair facilities
• Shops using standard 110V electrical service
Not For
• Cutting materials larger than listed capacity
• High volume production cutting environments
• Shops requiring automatic feed cutting systems
If you do not have access to a 110V power outlet, this is not your machine.
Material Thickness | Performance
Solid Round 90 degrees | 1.58 inch
Solid Round 45 degrees | 1.38 inch
Tube 90 degrees | 2.56 inch
Tube 45 degrees | 2.36 inch
Square 90 degrees | 2.17 inch
Square 45 degrees | 2 inch
Rectangle 90 degrees | 3.55 inch x 1.77 inch
Rectangle 45 degrees | 2.36 inch x 1.77 inch
Maximum Output: Determined by blade selection and material type
Duty Cycle:
Designed for manual cutting operations with coolant and proper blade selection.
Technical Specifications for the Laguna Tools Manual Cold Saw Model 250
Model Number: 250
Part Number: 974250-1E
Motor Power: 1.2 HP
Voltage: 110V
Phase: Single Phase
Blade Diameter: 10 inch
Blade Speed: 44 RPM
Maximum Vise Opening: 4 inch
Maximum Miter Angle: 45 degrees left and right
Cutting Ability: Ferrous, non ferrous metals, plastics
Solid Round Capacity 90 Degrees: 1.58 inch
Solid Round Capacity 45 Degrees: 1.38 inch
Tube Capacity 90 Degrees: 2.56 inch
Tube Capacity 45 Degrees: 2.36 inch
Square Capacity 90 Degrees: 2.17 inch
Square Capacity 45 Degrees: 2 inch
Rectangle Capacity 90 Degrees: 3.55 inch x 1.77 inch
Rectangle Capacity 45 Degrees: 2.36 inch x 1.77 inch
Work Height: 37 inch
Machine Height: 61 inch
Machine Width: 22 inch
Machine Depth: 36 inch
Machine Weight: 378 lbs
Power Requirements
110V single phase electrical service required
Laguna Tools Manual Cold Saw Model 250 Package Includes
Cold saw blade
Pedestal base
Tool kit
One gallon coolant
Adjustable positive stop
Upgrade options available via dropdown selections.
Products sold on FabCore X Supply are fulfilled through our authorized U.S.-based distribution network.
Please keep all shipping cartons and packaging materials until you have fully inspected your order and confirmed that the products are in acceptable condition.
Orders may arrive in multiple shipments from different warehouse locations depending on product availability and warehouse location.
Processing Time:
1–2 business days
Standard Parcel Transit Time (Continental U.S.):
3–7 business days
Freight Transit Time:
5–10 business days
Delivery timeframes are estimates only and are not guaranteed.
Orders ship via major carriers including USPS, UPS, and LTL freight carriers.
Carrier delivery estimates are service goals and may be impacted by factors outside our control, including:
Severe weather or natural events
Holiday or peak shipping volume
Transportation or facility disruptions
Address or routing errors
Local carrier processing delays
USPS Priority Mail timeframes are not guaranteed delivery dates. UPS and freight carriers may also experience similar delays.
Most orders over $100 USD qualify for free shipping.
Exclusions:
Products weighing over 69 lbs or requiring palletized freight shipment are excluded from free shipping and are subject to freight charges.
Large or heavy products that exceed standard carrier weight or size limits (over 69 lbs) ship via truck freight and may arrive shrink-wrapped on a pallet.
Freight shipments ship for a flat fee of $250.00 when delivered to:
A commercial address with forklift or loading dock access, or
A freight terminal for customer pickup.
Freight shipments can be delivered to residential addresses; however, additional carrier accessorial fees apply.
Examples of accessorial charges include:
Residential delivery surcharge
Liftgate service
Limited access delivery fees
Appointment delivery or re-delivery charges
Customers shipping to residential addresses will be contacted by Customer Service if additional freight charges apply.
Someone must be present to sign for and accept delivery of all freight shipments.
If liftgate service is declined but used at delivery, the customer is responsible for the additional carrier charge.
Items purchased separately from machines or palletized equipment incur an additional $250 freight shipping fee when shipped to a commercial address.
When delivered to a residential address, customers are responsible for all applicable freight and accessorial charges.
All freight shipments leave our suppliers’ facilities in good condition.
Risk of loss transfers upon confirmed delivery in accordance with carrier documentation. We assist customers with delivery-related issues in accordance with our published policies.
To protect yourself:
Inspect all shipments immediately upon delivery.
If possible, inspect the contents while the driver is present.
Note any visible damage or missing items on the delivery receipt before signing.
For freight terminal pickups (“Hold for Pickup” shipments), inspect the shipment before leaving the terminal. Damage not noted at pickup may be denied by the carrier.
We are happy to assist customers with freight claims when possible; however, freight claims are ultimately handled by the carrier.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
We understand you have many options when purchasing equipment. At FabCore X Supply, our goal is to provide a reliable, transparent, and professional buying experience for every customer.
Here’s what you can expect when you shop with us:
We work closely with authorized manufacturers and distribution partners to offer competitive pricing. If you find the same product advertised for less by an eligible authorized retailer, we’ll review your request through our Price Match Policy.
We offer a 30-day return window on eligible products. Returns are processed in accordance with our published return policy.
Our team is committed to helping customers choose the right equipment and providing support throughout the ordering and delivery process.
All products on our site are sourced from authorized manufacturers and distributors. We carefully select products based on quality, reliability, and performance standards. (See List of Authorized Suppliers)
Orders are processed and fulfilled through our authorized U.S. distribution partners to help ensure proper handling and dependable delivery.
FabCore X Supply
6108 Tiffield Way
Wake Forest, NC 27587
Email: sales@fabcorexsupply.com
Phone: (919) 435-2799
